Removing and installing left side panel trim — AUDI

🧭 Before you start

Fits: VW Transporter T5 (7H), VW Transporter T6 (7E)

📋 Procedure

1. ⚠ To prevent damage/scratching of adjacent surfaces in interior, mask around components and their adjacent surfaces using commercially available adhesive tape and/or cover/mask using plastic foil. — Remove upper B-pillar trim .
2. Remove left C-pillar trim .
3. Remove roof storage compartment .
4. Removing and installing right cover for storage compartment .
5. Remove D-pillar trim .

6. Removing and installing cupboards .
7. Switch off ignition and all electric loads and then remove ignition key.
8. Remove clamping pins for expansion rivets (2) on C-pillar using 3 mm hexagon key. Then remove expansion rivet for right side panel trim (1).
9. Unscrew bolts (2) for left side panel trim (1) and remove left side panel trim.
10. Renew bolts (2) for left side panel trim (1) and tighten them.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Checking vacuum hoses with non-return valves to valve N125 and N126
• Removing and installing filler line for reducing agent (panel van and window van)
• Removing and installing reducing agent tank (panel van and window van)
• Removing and installing spray jet pop-up cylinders
• Removing and installing electronic ignition lock