Removing and installing horn for special signals/loudspeaker - Audi A6 Security — AUDI

🧭 Before you start

Fits: Audi A6 C6 (4F, 2004–2011)

Don't miss

• Mark electrical wiring (4) and (5) for re-installation.

📋 Procedure

1. Switch off ignition and take out ignition key.
2. Remove front bumper cover 63.
3. Mark electrical wiring (4) and (5) for re-installation.
4. Unplug electrical connectors (2 ... 5).
5. Remove bumper 63.

6. Unscrew bolts (arrows).
7. Detach bracket with horn and horn for special signals/loudspeaker (item 1) from bumper.
8. Unscrew bolts (arrows).
9. Remove horns (1) and (2) for special signals/loudspeaker from bracket (3).
10. Unscrew nut (5).
11. Unplug electrical connector (4) and remove horn from bracket.
12. Guide electrical wiring for horn for special signals/loudspeaker out of bracket.
13. Cut through protective sleeve to renew horn for special signals/loudspeaker and remove electrical wiring.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing A-pillar trim, top (from week 36.02 onwards)
• Checking signal from coolant temperature sender – Audi A6 C5
• Eliminating rear wiper judder
• Removing and installing starter catalytic converter - engine code letters AKE, AYM, BAU, BCZ, BDG, BDH, BFC
• Checking delivery pressure of power steering pump – Audi