Removing and installing fuse holder FSF in luggage compartment (right-side) - Coupé — AUDI

🧭 Before you start

Fits: Audi A5 (8T, 2007–2016)

Don't miss

• Exact contact assignment of fuse holder F in luggage compartment (right-side) can be found in applicable current flow diagram .

📋 Procedure

1. With ignition switched off, disconnect earth cable at battery (see the separate procedure).
2. Open cover in luggage compartment side trim (right-side).
3. Release retaining clips (3) in direction of (arrow) and press fuse carriers (2) out of fuse holder F towards rear.
4. Remove nut (4).
5. Guide fuse holder F (item 1) out of body.

6. Unclip fuse holders at relay carrier.
7. Pull out relay (5) and control units.
8. Release retaining clips (arrows) and press relay carrier (2) towards rear out of retainer (1).
9. If fitted, cut through cable ties and remove fuse holder F. [Note: Exact contact assignment of fuse holder F in luggage compartment (right-side) can be found in applicable current flow diagram .]
10. Fit fuse holder F (item 1), making sure guides (2) are inserted properly in mountings (arrows).
11. Connect battery. Steps required (see the separate procedure).

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing switch unit with window lifter switches E40, E39, E41, E53 and E55
• Removing and installing fuse carrier on 9-socket relay carrier
• 5-speed Manual Gearbox 085 DS Self-diagnosis — Final control diagnosis
• Checking and adjusting selector lever cable on vehicles with vehicle ID No. from 8E_8A 002700 onwards
• Cleaning ATF cooling pipes and ATF cooler – Audi A6 C5