Removing and installing digital radio R147, up to week 44/2008 — AUDI

🧭 Before you start

Fits: Audi A5 (8T, 2007–2016)

📋 Procedure

1. Switch off all electrical equipment.
2. Remove ignition key.
3. When renewing control unit, select "“Replacement”" function for appropriate control unit in "“Guided Fault Finding”".
4. Open left-side luggage compartment storage area.
5. Unscrew nuts (1), (2), (4) and (5) on infotainment rack (3).

6. Pivot rack into luggage compartment until connector at digital radio R147 is accessible.
7. Unplug MOST bus connector.
8. Fit protective cap for cable connectorVAS 6223/9(1) onto MOST bus connector (2).
9. Release and unplug remaining connectors at digital radio R147.
10. Turn around rack.
11. Remove bolts (3) and detach digital radio R147(2) from rack (1).
12. Install in reverse sequence of removal.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing turbocharger (engine codes BJJ, BJK, BJL, BJM)
• Removing and installing reducing agent tank (platform van and chassis)
• Removing and installing roller carriage
• Removing and installing exterior mirror (electrically adjustable)
• Removing and installing upper suspension link, Crafter 4MOTION with Achleitner four-wheel drive