Removing and installing coolant pipes (right-side): Audi A8 D4 (CAXA, CAYB, CAYC, CEJA, …)

🧭 Before you start

Fits: Audi A8 D4 (4H, 2010–2017)

• Renewed: o-ring

Don't miss

• Fit new O-ring.Secure all hose connections with the correct type of hose clips (same as original equipment) Electronic parts catalogue.

🔧 Engine codes this applies to

📋 Procedure

1. Remove exhaust manifolds with catalytic converters (right-side) .
2. Release hose clip (3) and detach coolant hose.
3. Unscrew bolt (arrow) and remove coolant pipe (1) with bracket (2).
4. Detach heat shield sleeve (1).
5. Remove bolts (arrows).

6. Release hose clips (2 and 4), lift retaining clip (3) and detach coolant hoses.
7. Detach coolant pipes. [Note: Fit new O-ring.Secure all hose connections with the correct type of hose clips (same as original equipment) Electronic parts catalogue.]
8. Install alternator Electrical system27Alternator; Removing and installing alternator.
9. Install exhaust manifold with catalytic converters (right-side) .
10. Connect coolant hose with plug-in connector .

Other AUDI procedures

• Removing and installing radiator (Tiguan, Passat) – VW 1.4
• Removing and installing engine control unit J623 with protective housing
• Removing and installing fuel pump control unit J538
• Removing and installing anti-theft engine control unit J623 (Golf ► 2008, Eos ► 10.2008)
• Exploded view - timing chain
• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures