Removing and installing ATF cooler - vehicles with V6 3.2 ltr./V8 4.2 ltr. FSI engine — AUDI

🧭 Before you start

Fits: Audi A8 D3 (4E, 2002–2010)

Don't miss

• (Items 2 , 3, 4) can be disregarded.

📋 Procedure

1. Remove front noise insulation (loosen fasteners (1)). [Note: (Items 2 , 3, 4) can be disregarded.]
2. Move air hose for secondary air system (1) clear from bracket for ATF cooler
3. Remove bolts (arrows) and detach ATF cooler (hoses remain connected).
4. Place used oil collection and extraction unitV.A.G 1782 below ATF cooler.
5. Remove bolts (10 and 11) and detach ATF pipes (9 and 12) from ATF cooler (1).

6. Clamp off coolant hoses (14) with hose clamps 3094 and detach hoses from ATF cooler.
7. Remove bolts (7) and detach ATF cooler.
8. Renew O-rings (8 and 13) on ATF pipes leading to ATF cooler.
9. Check ATF level in planetary gearbox .
10. Check coolant level Engine, mechanics19.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing bottom ancillary bracket – Audi 1.2
• Checking fuel pump non-return valve, engine codes BSE, BSF
• Removing tank shut-off valve on solenoid valves with securing clip · 1 torque figures
• Removing and installing fuel tank, four-wheel drive, engine codes BJB, BLS, BSU
• Removing and installing fuel gauge senderG, front-wheel drive, engine codes CAYD, CAYE, CFHC, CFHE, CFHF, CLCA, CFJA