TorqFix

Checking operation of the ignition key withdrawal lock — AUDI

Checking operation of the ignition key withdrawal lock on Audi: 11 steps. What to remove, in what order, and what to check after.

Workshop procedure for AUDI — the exact step sequence and torque figures, straight from real workshop data.

11 steps

🧭 Before you start

Fits: platform code 70A

  • Renewed: defective parts

Don't miss

  • It must be possible to shift selector lever to "“R”", "“N”", "“D”", "“3”", "“2”" or "“1”"

📋 Procedure

  1. Move selector lever to "“P”"
  2. Switch off ignition
  3. Withdraw ignition key
  4. Renew defective parts.
  5. Correct adjustment .
AUDI? Steps differ between engine variants — check this job against your exact car before you commit to it. Check my car — free →
  1. Depress brake pedal
  2. Insert ignition key
  3. Switch on ignition
  4. It must be possible to shift selector lever to "“R”", "“N”", "“D”", "“3”", "“2”" or "“1”"
  5. Depress brake pedal
  6. Move selector lever to "“P”"

Other AUDI procedures

Who makes these pages, and how

TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.

The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.

Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.

Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com

The story behind TorqFix →

Workshop data on this page last updated 20 Sep 2026.