Checking operation of the ignition key withdrawal lock — VW
Checking operation of the ignition key withdrawal lock on VW: 11 steps. What to remove, in what order, and what to check after.
Workshop procedure for VW — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: platform codes 1C1, 1Y7
- Renewed: defective parts
Don't miss
- It must be possible to shift selector lever into "“R, N, D or S”".
📋 Procedure
- Move selector lever to "“P”".
- Switch off ignition.
- Withdraw ignition key.
- Renew defective parts.
- Correct adjustment.
- Depress brake pedal.
- Insert the ignition key and switch on the ignition
- Move selector lever to "“P”".
- It must be possible to shift selector lever into "“R, N, D or S”".
- Depress brake pedal.
- Move selector lever to "“P”".
Other VW procedures
- Removing engine · 41 torque figures
- Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
- Adjusting valve timing – VW Passat B5 · 83 torque figures
- Removing and installing camshafts – VW Passat B6 · 39 torque figures
- Removing and installing coolant pump · 53 torque figures
- Repairing Girling rear disc brakes, vehicles with front or four-wheel drive
- Assembly overview - power steering box (ZF)
- Dismantling and assembling hydraulic unit, design stage 3 (ABS)
- Dismantling and assembling hydraulic unit (ABS/EDL)
- Repairing rear brakes, vehicles with disc brakes as of 08.87 and vehicles with ABS
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.