Renewing bottle with tyre sealant: VW Sharan I / SEAT Alhambra

🧭 Before you start

Fits: VW Sharan I / SEAT Alhambra (7M)

📋 Procedure

1. Unclip the housing on the lower part of the retainer and pull the housing upwards.
2. Turn the bottle counter-clockwise and remove it from the retainer.
3. Unscrew the knurled nut (arrow) from the bottle for the hose leading from the compressor to the bottle.
4. Dispose of the bottle
5. Carefully place the knurled nut on the thread (1) and tighten it by hand.

6. Insert new bottle with tyre sealant into retainer.
7. Turn bottle clockwise onto stop.
8. Secure hose (arrow A) in the hose guide.
9. Roll up cable with connector for compressor power supply and place it in the recess under the pressure gauge.
10. Fit housing.
11. Roll up the hose with tyre inflating connection and place it in the housing recess.
12. Stick the new sticker from the repair kit on the housing (arrow).

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Removing and installing brake master cylinder, LHD vehicles with diesel engine
• Removing and installing iPhone storage compartment
• Checking operation and power supply of fuel pump, vehicles without fuel pump control unit J538
• Removing and installing auxiliary radiator for charge air system (Tiguan, Passat)
• Removing bevel box - vehicles with turbo diesel engine, up to 05.10