Removing undamaged rear side window: VW Sharan II / SEAT Alhambra

🧭 Before you start

Fits: VW Sharan II / SEAT Alhambra (7N, 2010–)

Don't miss

• Secure one end of cord (3) to pull handleV.A.G 1351/1(2) to counterhold.

📋 Procedure

1. Remove rear panel trim General body repairs, interior70Trim, insulation; Pillars and side trims.
2. Pull additional seal out
3. Pull cutting cord (1) through adhesive sealant at point marked on illustration and into inside of vehicle using awlV.A.G 1474/2 from removal kit for flush bonded windowsV.A.G 1474 A.
4. Press seal aside so that it is not damaged.
5. Insert cutting cord (3) behind seal in window flange with aid of tube (1).

6. Secure one end of cord (3) to pull handleV.A.G 1351/1(2) to counterhold.
7. Pull other end of cord (2) into vehicle interior as well.
8. Secure other end of cord to reel deviceV.A.G 1654 A(3).
9. Turn reel deviceV.A.G 1654 A(3) accordingly and cut window free.
10. Press cutting cord against window glass with plastic wedge during cutting process, in order to have clearance at window flange.
11. Instead of reel deviceV.A.G 1654(3), reel deviceV.A.G 1654 A(3) can be used.
12. One suction cup can be removed from the reel deviceV.A.G 1654(3) as shown in illustration. This ensures that the reel deviceV.A.G 1654 A(3) roller can be guided closer to the window flange.

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Repairing welded nut in longitudinal member/sill – VW · 1 torque figures
• Removing and installing tensioner for poly V-belt (Tiguan)
• Removing and installing vane pump, 5-cylinder diesel engine
• Removing and installing coolant-cooled alternator, 6-cyl. 3.0 l TDI engine
• Checking fuel delivery rate, engine code BGU – VW Touran I 1.6