Removing trim under steering column — VW

🧭 Before you start

Fits: platform codes 9C1, 1C1, 1Y7

📋 Procedure

1. Lever off cover caps (1) and remove screws (2).
2. Remove switch mounting (3) from bracket.
3. Release rear of cover (1) from dash panel and pull out.
4. Remove bolts (2).
5. Turn rotary part (1) for lighting switch to position 0.

6. Press rotary grip inwards (arrow A) then turn it to the right (arrow B).
7. Pull switch out of dash panel (arrow C) and disconnect electrical connections.
8. Unclip headlight range control switch (2) and pull connector off.
9. Remove screw (arrow) (hidden under a cover cap) from glove box (1).
10. Remove the four screws (1).
11. Unclip trim (2) upwards and remove from dash panel.

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Removing and installing lower coolant pipe – VW Passat B5 1.8
• Checking vane pump delivery pressure, V6 petrol engine – VW
• Removing and installing pinion gear and dismantling and assembling
• Removing and installing fuel system diagnostic pump and activated charcoal filter
• Adjusting selector lever to selector cover gate – VW Phaeton · 1 torque figures