Removing dash panel vent from centre trim — VW
Removing dash panel vent from centre trim on VW: 10 steps. What to remove, in what order, and what to check after.
Workshop procedure for VW — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: platform codes 6S1, 6S2
📋 Procedure
- Remove radio (1)91.
- Remove card holder (2), if fitted 70.
- Remove stowage compartment (3).
- Lever out trim panel (1) for controls carefully using a screwdriver and pad.
- Remove stowage compartment from dash panel centre 70.
- Remove bolts (arrows).
- Remove bolts (arrows).
- Remove bolts (arrows).
- Pull connectors off switches in centre trim panel.
- Remove centre trim panel.
Other VW procedures
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.