TorqFix

Removing centre vent from centre trim panel — VW

Removing centre vent from centre trim panel on VW: 10 steps. What to remove, in what order, and what to check after.

Workshop procedure for VW — the exact step sequence and torque figures, straight from real workshop data.

10 steps

📋 Procedure

  1. Remove radio (1)91.
  2. Remove drink holder (2), if fitted (repair group 70).
  3. Remove storage compartment (3).
  4. Lever controls panel (1) and base out carefully using a screwdriver.
  5. Remove stowage tray from centre of dash panel (repair group 70).
VW? Steps differ between engine variants — check this job against your exact car before you commit to it. Check my car — free →
  1. Remove screws (arrows).
  2. Remove screws (arrows).
  3. Remove screws (arrows).
  4. Pull connectors off switches in centre trim panel.
  5. Remove centre trim panel.

Who makes these pages, and how

TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.

The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.

Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.

Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com

The story behind TorqFix → · How these pages are made →

Workshop data on this page last updated 20 Sep 2026.