Removing and installing windscreen washer system spray jets — VW
Removing and installing windscreen washer system spray jets on VW: 8 steps. What to remove, in what order, and what to check after.
Workshop procedure for VW — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: VW Touran I (1T, 2003–2015)
📋 Procedure
- Push spray jet upwards (arrow A) and pull out of flap at the rear (arrow B).
- Release hose clip (1) in direction of (arrow), and pull hose connection (2) off spray jet.
- Models with heater washer jets, release and disconnect connector (3).
- Remove spray jet (4).
- Reconnect connector (3) to spray jet.
- Fit hose connection (2) onto spray jet and lock hose clip (1).
- Starting at the top, push spray jet into mounting hole until it locks in place audibly.
- Adjusting spray jets
Other VW procedures
- Removing engine · 41 torque figures
- Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
- Adjusting valve timing – VW Passat B5 · 83 torque figures
- Removing and installing camshafts – VW Passat B6 · 39 torque figures
- Removing and installing coolant pump · 53 torque figures
- Removing and installing exterior mirror, manually adjustable
- Removing and installing selector mechanism, selector housing and crash plate
- Removing and installing gas rail with gas injector N366/N367/N368
- Removing and installing drive motor temperature sender G712
- Draining and adding coolant
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.