Removing and installing towing bracket, saloon — VW

🧭 Before you start

Fits: platform codes AU1, BX5

Don't miss

• The bolts (4) function as plugs and seal the passenger compartment against exhaust fumes, and must without exception be installed. — Perform functional check after installation of towing bracket.

📋 Procedure

1. Remove rear bumper cover .
2. Pull off locking element (7) on release lever (6)(arrow a).
3. Pull release lever (6) off Bowden cable (2)(arrow b).
4. Pull Bowden cable (2) out of lock carrier trim.
5. Remove lock carrier trim General body repairs, interior70Luggage compartment trims; Removing and installing lock carrier trim.

6. Thread Bowden cable (2) out of guide (8)(arrow c).
7. Pull Bowden cable together with grommet (3) out of vehicle.
8. Remove bolts (5) on left and right.
9. Pull towing bracket (1) in a parallel movement out of longitudinal members.
10. ⚠ The bolts (4) function as plugs and seal the passenger compartment against exhaust fumes, and must without exception be installed. — Perform functional check after installation of towing bracket.

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Removing and installing coolant temperature sender at radiator outlet G83
• Checking control line to turbocharger – VW
• Removing and installing interior mirror with rain and light sensor G397
• Removing and installing Bowden cable for operating backrest
• Removing and installing backrest cover panel – VW