Removing and installing side window, Cabriolet — VW

🧭 Before you start

Fits: platform codes 5C7, 5C1

Don't miss

• Ensure that the side window is properly located in mounting of window regulator (arrow).

📋 Procedure

1. Remove side panel trim General body repairs, interior70Trims, interior; Removing and installing side panel trim.
2. Remove trim strip around shoulder of convertible top .
3. Remove inner door seal in area of side window and front bolt (2).
4. Remove bolts (2).
5. Remove intermediate plate (1) and foam element (3).

6. Unscrew bolts (2) and remove side window (1) upwards.
7. Insert side window (1) from above. [Note: Ensure that the side window is properly located in mounting of window regulator (arrow).]
8. Adjust side window .
9. Tighten bolts (2).
10. Install intermediate plate (1) and foam element (3).
11. Tighten bolts (2).
12. Further assembly is performed in reverse order of removal.
13. Install inner door seal .
14. Install trim strip around shoulder of convertible top .
15. Install left and right side panel trims General body repairs, interior70Trims, interior; Removing and installing side panel trim.

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Removing and installing window regulator motor V14/V15 – VW
• Removing and installing window regulator motor V26/V27 – VW
• Removing and installing wheel bearing unit, multi-link suspension, four-wheel drive
• Removing and installing right auxiliary radiator
• Separating exhaust pipes/silencers, Passat with engine codes CHHB, CJXA, Golf with engine code CJSB