TorqFix

Removing and installing seat height adjustment: VW Golf Sportsvan

Step-by-step removing and installing seat height adjustment for the VW Golf Sportsvan: 11 steps. What to remove, in what order, and what to check after.

Workshop procedure for VW — the exact step sequence and torque figures, straight from real workshop data.

11 steps

🧭 Before you start

Fits: VW Golf Sportsvan (AM1, 2014–2020)

Don't miss

  • Bolts (1) and bolt (3) are of different lengths.Bolt (3) is shorter.Ensure proper allocation.

📋 Procedure

  1. Adjust seat to fully upright position.
  2. Remove backrest adjustment .
  3. Remove handle for seat height adjustment .
  4. Remove seat trim on sill side .
  5. Remove bolt (2).
VW? Steps differ between engine variants — check this job against your exact car before you commit to it. Check my car — free →
  1. Remove lever for seat height adjustment (1).
  2. Unscrew bolts (1) and (3).
  3. Remove seat height adjuster (2). [Note: Bolts (1) and bolt (3) are of different lengths.Bolt (3) is shorter.Ensure proper allocation.]
  4. Push down seat via backrest.
  5. Fit seat height adjustment (2).
  6. Tighten bolts (1) and (3)

Who makes these pages, and how

TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.

The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.

Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.

Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com

The story behind TorqFix →

Workshop data on this page last updated 20 Sep 2026.