Removing and installing headlight washer system pump V11: VW Sharan II / SEAT Alhambra

🧭 Before you start

Fits: VW Sharan II / SEAT Alhambra (7N, 2010–)

📋 Procedure

1. Remove front right wheel housing liner General body repairs, exterior66Wheel housing liner; Assembly overview - front wheel housing liner.
2. Place drip tray under washer fluid reservoir.
3. Follow route of wiring connector (1) and unclip from washer fluid reservoir.
4. Turn retaining clip on washer fluid lines (3) to release.
5. Pull off washer fluid line from headlight washer system pump V11(2).

6. Release and disconnect connector (1).
7. Pull headlight washer system pump V11(2) upwards out of washer fluid reservoir.
8. If necessary, remove sealing grommet for headlight washer system pump V11 from washer fluid reservoir.
9. Check sealing grommet for damage.
10. Fit sealing grommet correctly into opening in washer fluid reservoir.
11. Moisten sealing grommet with washer fluid to ease installation of headlight washer system pump V11.
12. On completion of installation work, bleed headlight washer system .

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Removing and installing windscreen frame seal
• Removing and installing side window, Cabriolet
• Removing and installing seat occupied recognition; Removing pressure sensor for seat occupied recognition G452, Basic
• Removing and installing mounting bracket on driver side · 1 torque figures
• Removing and installing mounting bracket on front passenger side · 1 torque figures