Removing and installing »easy-entry« Bowden cable B — VW

🧭 Before you start

Fits: platform code 137

Don't miss

• Make sure that backrest is in basic position, i.e. backrest must be turned to front stop using adjuster knob. — First attach »easy-entry« Bowden cable B (1) eyelet at backrest fitting pin (arrow).

📋 Procedure

1. Remove front seat .
2. Turn backrest to front stop using adjuster knob.
3. Unclip »easy-entry« Bowden cable B (3) at seat longitudinal adjustment (2).
4. Detach »easy-entry« Bowden cable B (3) eyelet at seat rail pin (arrow).
5. Press padding aside.

6. Detach »easy-entry« Bowden cable B (1) eyelet at backrest fitting pin (arrow).
7. Detach »easy-entry« Bowden cable B attachment at backrest fitting and remove »easy-entry« Bowden cable B.
8. ⚠ Make sure that backrest is in basic position, i.e. backrest must be turned to front stop using adjuster knob. — First attach »easy-entry« Bowden cable B (1) eyelet at backrest fitting pin (arrow).
9. Secure »easy-entry« Bowden cable B to backrest fitting.
10. Attach »easy-entry« Bowden cable B (3) eyelet at seat rail pin (arrow).
11. Clip »easy-entry« Bowden cable B (3) in at seat longitudinal adjustment (2).

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Removing and installing lower toothed belt guard – VW
• Removing and installing glow plug
• Separating control unit from hydraulic unit
• Removing and installing front body acceleration senders G341/G342
• Removing and installing dash panel cover on driver side