Removing and installing dash panel cover on front passenger side, cover with storage compartment — VW

🧭 Before you start

Fits: platform codes 5C7, 5C1

Don't miss

• Before installing, all securing elements must be checked for damage. Damaged parts must be replaced.

📋 Procedure

1. Switch off ignition.
2. Remove dash panel end cover on front passenger side .
3. Remove trim of dash panel insert .
4. Remove dash panel vent on front passenger side .
5. Remove middle dash panel trim .

6. Removing passenger's storage compartment .
7. Remove bolts (1).
8. Remove bolts (2).
9. Remove bolt (3).
10. Prise dash panel cover (4) off dash panel (5) using removal wedge3409.
11. Install in reverse order of removal. [Note: Before installing, all securing elements must be checked for damage. Damaged parts must be replaced.]

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Removing and installing over-centre spring, Scirocco, Golf Cabriolet, RHD vehicles
• Installing bevel box "“0CN”"
• Removing and installing over-centre spring, Golf Cabriolet, left-hand drive
• Installing gearbox mounting – VW Phaeton · 2 torque figures
• Removing and installing camshaft module – VW CSCA