Removing and installing coolant pipes (top front) — VW

🧭 Before you start

Fits: platform codes AU1, BX5

• Opens: coolant

Don't miss

• Secure all hose connections with hose clips meeting production standard Electronic Parts Catalogue.

🔧 Engine codes this applies to

📋 Procedure

1. Remove engine cover panel .
2. Drain coolant .
3. Remove bolts (1, 3).
4. Release fastener (arrow) and remove cover (2).
5. Free coolant hose (2).

6. Release fastener (arrows) and detach air duct (top section) (1).
7. Remove bolt (arrow) on both sides.
8. Unclip air duct (bottom section) (1) and detach.
9. Unclip bracket (1) with fuel hoses.
10. Remove bolts (arrows).
11. Release hose clip (3) and detach coolant hose.
12. Remove bolts (1, 2).
13. Release hose clips (arrows) and detach coolant hoses.
14. Detach coolant pipes (top front). [Note: Secure all hose connections with hose clips meeting production standard Electronic Parts Catalogue.]
15. Replenish coolant .
16. Fit engine cover panel .

Other VW procedures

• Removing and installing front section of reducing agent supply line
• Removing and installing exhaust gas recirculation cooler
• Removing and installing lower front coolant pipe – VW
• Removing and installing NOx sender G295 with control unit for NOx sender J583
• Checking return flow rate of injectors with engine running
• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures