Removing and installing button to open rear lid window E361 — VW

🧭 Before you start

Fits: VW Touareg I (7L, 2002–2010)

• Timing position: the crankshaft or camshaft is set and locked during this job
• Special tools named: locking pin

📋 Procedure

1. Remove wiper arm .
2. Remove hexagon nuts (1).
3. Open rear window; emergency rear window release .
4. Release cover (1) in (direction of arrow) from fasteners and remove.
5. Push insulation (1) aside in (direction of arrow), thus exposing connector.

6. Disconnect connector (arrow).
7. Remove securing nuts (arrows).
8. Remove locking pin (1) and wiper shaft with crank (2).
9. Remove button to open rear window E361.
10. Tighten securing nuts (arrows) to specified torque setting .
11. Tighten hexagon nut (1) to specified torque setting .
12. Install wiper arm .

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• VW Vehicles without power steering 1.0 AER alternator removal · 1 torque figures
• Assembling column tube and steering column – VW
• Removing and installing power assisted steering box to model year 2000
• Removing rear door window – VW Polo 9N
• Removing dual clutch, gearboxes made up to 05.2011