Removing and installing air conditioner compressor with ancillary bracket: engine codes BMK, CARA, CEXA and CEXB — VW

🧭 Before you start

Fits: VW Phaeton (3D)

• Opens: coolant

📋 Procedure

1. Place drip trayVAS 6208 beneath engine.
2. Drain cooling system 19.
3. Unscrew bolts (6, 12) and (15).
4. Unscrew bolts (9) and remove air conditioner compressor (8). Secure air conditioner compressor to body using suitable material (e.g. welding wire).
5. Unscrew bolts (7) and remove ancillary bracket.

6. Renewing.
7. Removing poly V-belt 13.
8. Removing and installing power steering vane pump 48.
9. Unscrew bolts (9) and remove air conditioner compressor (8). Secure air conditioner compressor to body using suitable material (e.g. welding wire).
10. Renewing. [Note: When installing poly V-belt, ensure that it is correctly seated on poly V-belt pulley.Poly V-belt routing for vehicles as of model year 2009 is described in the repair group 13 13Cylinder block, belt pulley end; Assembly overview - poly V-belt drive.]

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Removing and installing rear silencer, Saloon – VW 1.6 TDI · 1 torque figures
• Removing and installing wheel bearing unit, disc brakes, torsion beam axle
• Removing and installing inner door seal, Cabriolet
• Removing and installing dash panel cover on front passenger side, cover with reinforcement
• Removing and installing rear seat backrest cover and padding, Cabriolet