Removing air conditioning system magnetic clutch N25 from air conditioner compressor — VW

🧭 Before you start

Fits: platform codes 6E1, 6X1

Don't miss

• If hook is placed on lower edge of poly V-belt pulley, there is a danger of damaging air conditioning system magnetic clutch N25.

📋 Procedure

1. Carefully secure air conditioner compressor in a vice.
2. Using a pin wrench3212 and flexible socket wrench, unscrew hexagon nuts.
3. Insert a screwdriver into gap between coupling disc and poly V-belt pulley.
4. Turn screwdriver slightly (arrow).
5. Repeat procedure at two other points along circumference (arrows).

6. Remove clutch disc (8).
7. Remove spacers (3).
8. Remove circlip for poly V-belt pulley (7).
9. Pull off poly V-belt pulley (6) using three-arm pullerKUKKO 45-2.
10. Place hooks (arrow) as shown in illustration. [Note: If hook is placed on lower edge of poly V-belt pulley, there is a danger of damaging air conditioning system magnetic clutch N25.]
11. Remove solenoid by removing circlip holding it.
12. Remove solenoid from compressor.

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Connecting fault reader V.A.G 1551 and selecting a function
• Removing and installing suspension strut/coil spring
• Pressing in and pressing out wheel bearing
• Servicing magnetic coupling -N25-, manufactured by Sanden
• Removing and installing cylinder head for engine codes AQP and AUE