Connecting VAS 5051 vehicle diagnosis, testing and information system — VW

🧭 Before you start

Fits: VW Touareg I (7L, 2002–2010)

• Special tools named: VAS 5051, VAS 5051/3

Don't miss

• If displayed texts differ from those in procedure, user's manual for vehicle diagnosis, testing and information system VAS 5051.

📋 Procedure

1. Pull on handbrake.
2. Automatic gearbox: move selector lever to "“P”" or "“N”" position.
3. Manual gearbox: selector lever in neutral.
4. Open diagnosis connection cover (1) below left dash panel.
5. With ignition switched off, connect VAS 5051 using adapter lead VAS 5051/3.

6. Switch on ignition.
7. Switch off all electrical consumers. [Note: If displayed texts differ from those in procedure, user's manual for vehicle diagnosis, testing and information system VAS 5051.]
8. Press "“Go to”" key.
9. Select "“Function/component selection”".
10. Select "“Body”".
11. Select "“Electrical system”".
12. Select "“01 - On Board Diagnostic (OBD)”".
13. Select "“Immobiliser”".
14. Select "“Functions”".
15. Select "“Replacement of Access/Start Control Module”"

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures
• Removing and installing dash panel insert KX2
• Removing and installing cigarette lighter U1
• Checking oil pressure and oil pressure switch for reduced oil pressure F378
• Removing and installing brake system pressure accumulator VX70
• Fitting locations overview - components not located in passenger compartment, Climatronic