Brake system — Connecting Vehicle diagnosis, testing and information systemVAS 5051 A and selecting functions — VW

🧭 Before you start

Fits: platform code POLO

• Special tools named: VAS 5051/1, VAS 5051/3

Don't miss

• During test drive checking and measuring equipment must be installed on the rear seat.A second mechanic shall operate the equipment. — Connect diagnosis cable connector VAS 5051/1 or VAS 5051/3 to diagnosis connection (arrow).

📋 Procedure

1. ⚠ During test drive checking and measuring equipment must be installed on the rear seat.A second mechanic shall operate the equipment. — Connect diagnosis cable connector VAS 5051/1 or VAS 5051/3 to diagnosis connection (arrow).
2. Switch test equipment on (arrow).
3. Switch ignition on.
4. Touch field on display/button: Guided fault location.
5. Select one after another:

6. Confirm data entered.
7. Press button go to and select function "“function/component selection”".
8. Select "“Chassis”" on display.
9. Select "“Brake system”" on display.
10. Select indication "“01-Selfdiagnosis system ...”" on display.
11. Select indication "“Anti-locking brake system ... ”" on display.
12. Select indication "“Function”" on display.
13. Select indication "“Function”" on display.

Other VW procedures

• Removing engine · 41 torque figures
• Removing and installing camshaft – VW Golf Cabriolet · 47 torque figures
• Adjusting valve timing – VW Passat B5 · 83 torque figures
• Removing and installing camshafts – VW Passat B6 · 39 torque figures
• Removing and installing coolant pump · 53 torque figures