Timing belt replacement: Renault (G8T-706)
Step-by-step timing belt replacement for the Renault (G8T-706): 82 steps. What to remove, in what order, and what to check after.
Workshop procedure for RENAULT — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: platform codes 2.2, D
- Timing position: the crankshaft or camshaft is set and locked during this job
- Special tools named: locking tool
Don't miss
- Always fit a new timing belt after removal
- Keep the tensioner mark in position and tighten the tensioner
🔧 Engine codes this applies to
📐 22 workshop diagrams for G8T-706
Real factory drawings for this job — timing marks, bolt locations and routing. Locked in the free view.
📋 Procedure
Preparation and removal
- Timing belt
- Always fit a new timing belt after removal
- Vehicles with air conditioning:
- Check the camshaft timing marks
- Remove the front right splash guard
- Check the injection pump timing
- Remove the oil breather reservoir
- Remove the crankshaft pulley
- 3 turns
- Remove the idler pulley
- Remove the ancillary drive belt tensioner
- Turn the tensioner as shown
- Remove the timing belt lower cover
- Remove the plug
- Fit the crankshaft locking tool
- Remove the cover
- Remove the vacuum pump toothed belt
Installation and checks
- Fit the vacuum pump toothed belt
- Pre-tension the timing belt
- Note: Avoid bending, torsion or traction
- Use a special tool:
- Tighten the tensioner centre bolt
- Keep the tensioner mark in position and tighten the tensioner
- Tighten the tensioner centre bolt
- Align the timing marks
- Check the camshaft timing marks
- Fit the idler pulley
- Refit the coolant pump pulley
- Fit the ancillary drive belt
- Refit the engine support
- Note: Align the engine support
- Tighten the engine support bolts
- Refit the front right splash guard
- Refit the engine lower covers
- Refit the front right wheel
- Reconnect the battery earth cable
Ask TorqFix about your Renault G8T-706 — it answers with the exact sequence for that engine and the workshop drawing for each step. First question is free after a 20-second sign-up, no card.
Ask about your Renault G8T-706 — free → or sign up free to see the drawingsOther RENAULT procedures
- Renault Laguna V6 timing chain replacement
- Renault G8T-714/G8T-716 timing belt replacement
- Renault Laguna II F5R-700 timing belt replacement
- G8T version with cam belt only (Laguna I) refit + multi tiff included MB 25-03-05 Dialogis
- Renault G8T-740 auxiliary belt replacement
- Laguna III 4-wheel steering versions only
- Clio III D4F/K4J/K4M/K9K - JH3/JR5 gearbox
- G9T_2.2_dci_fuel pump timing
- Renault Clio I Wiliams F7R-700 timing belt replacement
- Ancillary belt K4M, K4J
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.