Gearbox removal & installation: Peugeot 307 motor (TU3JP, TU5JP4)

🧭 Before you start

Fits: platform code 1.4

• Opens: brake fluid, gearbox oil

🔧 Engine codes this applies to

📋 Procedure

1. Installation is in the reverse order of removal
2. Gearbox support:
3. Drain the gearbox oil
4. Drain the brake fluid reservoir
5. Note: Disconnect the reservoir and place it aside

6. Remove the windscreen wiper arms
7. Remove the air deflector
8. Remove the cover
9. Remove the reinforcement brace
10. Remove the air filter together with the air duct and resonance duct
11. Remove the front right splash guard
12. Remove the battery with tray
13. Remove the front bumper
14. Remove the cross member
15. Remove the radiator and fan
16. Remove the heater unit
17. Remove the lower cross member
18. Remove the catalytic converter
19. Remove the ancillary drive belt
20. Vehicles with air conditioning:
21. Disconnect the air-conditioning compressor and place it aside
22. All vehicles:
23. Remove the drive shafts
24. Remove the clutch slave cylinder
25. Remove the reinforcement brace
26. Remove the gearbox operating linkage
27. Remove the cable guide
28. Disconnect the heater hoses
29. Disconnect the earth cable
30. Disconnect all the engine wiring
31. Disconnect the electrical wiring from the gearbox
32. Fit the special tool to support the engine
33. Remove the right-hand engine support
34. Remove the gearbox support
35. Remove the engine in a forward direction

Other PEUGEOT procedures

• TU3A Drive belt removal
• Citroen 1997 timing belt replacement
• Peugeot except 1997 timing belt replacement
• TU1JP TU3JP auto-tens 2001->
• Peugeot 307_TU3JP TU3JP cylinder head removal & torque
• Peugeot 407 and EW10J4/EW7J4 timing belt replacement
• Peugeot 306 DW8/DW8B timing belt replacement
• 406 XUD9 turbo
• Peugeot EP6CDTX timing chain replacement
• 1007 - DV6TED4 - BE4R gearbox removal installation