Movano with DPF G9U-632 — OPEL / VAUXHALL

🧭 Before you start

Fits: platform codes 2.0, CDTI, 16V, 115, DPF, |, 90, 2.5, 114, 145, (DPF)

Don't miss

• A diagnostic tool must be used for this operation
• The warning light should go out

🔧 Engine codes this applies to

📐 20 workshop diagrams for G9U-630(B6)

Real factory drawings for this job — timing marks, bolt locations and routing. Locked in the free view.

📋 Procedure

1. When the 'STOP' light is illuminated, the diesel particulate filter needs a forced regeneration
2. A diagnostic tool must be used for this operation
3. After diesel particulate filter regeneration, the engine oil should be renewed
4. Within 100 seconds
5. Press and hold the accelerator pedal

6. Press and release the brake pedal 3 times
7. The warning light should go out
8. Wait for 10 seconds
9. The warning light should go out
10. Turn the ignition off
11. Within 3 seconds
12. Turn the ignition on
13. The procedure is complete

Other OPEL / VAUXHALL procedures

• Vivaro/Movano w DPF 2011->
• Opel Vivaro G9U-630 timing belt replacement
• Trafic II G9U-630
• Master II (G9U-632)/ Trafic II (G9U-630, M9R) with FAP
• G9U_2.5_CDTi_fuel pump timing
• Opel Corsa C 1.2 CDTI timing chain replacement
• Opel Astra G 2.2 DTI Y22DTR timing chain replacement
• Opel VectraC, Signum 2.8 Z28NEL timing chain replacement
• Opel Astra G 2003 2.0 DTI Y20DTH timing chain replacement
• Opel Astra G X Y 20DTL 2.0 DTI X20DTL timing chain replacement