Leaf ZE0 EM57 — NISSAN
Leaf ZE0 EM57 on Nissan: 15 steps, engines EM57. What to remove, in what order, and what to check after.
Workshop procedure for NISSAN — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: platform code LEAF
🔧 Engine codes this applies to
📋 Procedure
- Before disconnecting the battery
- Reset the programmed stations and the user preferences
- Reset the date and time
- Until the window is fully open
- Wait for more than 2 seconds
- Release the switch
- The system is reset
- Repeat the procedure for the passenger's window
Other NISSAN procedures
- Nissan Micra K12 CR timing chain replacement
- Nissan non type specific 2.0 dCi timing chain replacement
- Nissan X-Trail T30 QR20, 25 QR20DE timing chain replacement
- Nissan X-Trail T31 2.4 QR25DE timing chain replacement
- Nissan Kubistar 1.5 dCi auxiliary belt replacement
- Ancillary belt M9R (Qashqai)
- Brake system warning
- X-Trail T30 YD22DDTi
- Nissan Micra K11 1.5 D VJX/VJZ timing belt replacement
- Nissan Note 1.4i JH3 CR14DE gearbox removal & installation
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.