W202 717.41/43/44/46 (except 717.448/449) gearbox — MERCEDES-BENZ
W202 717.41/43/44/46 (except 717.448/449) gearbox on Mercedes-Benz: 27 steps, engines 104.941, 111.920, 111.921, 111.941.
Workshop procedure for MERCEDES-BENZ — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: platform codes 180, -T, |, 200, CDI, DIESEL, KOMPRESSOR, 220, 230, 240, T, 250, TURBODIESEL
- Renewed: self-locking nuts
🔧 Engine codes this applies to
📐 20 workshop diagrams for 104.941
Real factory drawings for this job — timing marks, bolt locations and routing. Locked in the free view.
📋 Procedure
- Remove the rear exhaust pipe
- Gearbox support to body:
- Push the propeller shaft backwards
- Remove the speedometer plug from the gearbox
- Gearbox filler plug
- Remove the ground cable from the gearbox
- Remove the engine/gearbox attaching bolts
- Remove the gearbox from under the vehicle
- Refit all parts in the reverse order of removal
- Renew the self-locking nuts
Ask TorqFix about your Mercedes-Benz 104.941 — it answers with the exact sequence for that engine and the workshop drawing for each step. First question is free after a 20-second sign-up, no card.
Ask about your Mercedes-Benz 104.941 — free → or sign up free to see the drawingsOther MERCEDES-BENZ procedures
- W210, W129, W163, W140, W170, W202, W208 clutch
- Mercedes-Benz eng. 111 timing chain replacement
- Mercedes-Benz 111.920 cylinder head removal & torque
- Mercedes-Benz eng. 2.0 111.951 timing chain replacement
- Mercedes-Benz eng. timing chain replacement
- Mercedes-Benz eng. Kompressor timing chain replacement
- Mercedes-Benz eng. 2.3 111.979 timing chain replacement
- Mercedes-Benz Citan 607.951 timing belt replacement
- Mercedes-Benz 276.9 W204 276.957 timing chain replacement
- M273 in W212
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.