716.643 gearbox - Sprinter I - M111 (111.984)/OM611 (611.981) engine — MERCEDES-BENZ

🧭 Before you start

Fits: platform codes 208, CDI, |, 211, 213, 214, NGT, 216, 308, 311, 313, 314, 316, 408, 411, 413, 414, 416, 616

• Renewed: gasket

Don't miss

• Caution! Safety straps MUST be used

🔧 Engine codes this applies to

📋 Procedure

1. Disconnect the propeller shaft from the gearbox
2. Disconnect the propeller shaft from the differential
3. Remove the propeller shaft
4. Remove the protective covers from the electrical connector
5. Disconnect the connectors

6. Disconnect the speedometer sensor
7. Renew the gasket if necessary
8. Remove the engine/gearbox lower attaching bolts
9. Support the engine/gearbox with a lifting jack
10. Caution! Safety straps MUST be used
11. Raise the gearbox slightly
12. Remove the starter motor
13. Move aside
14. Disconnect the earth cable from the gearbox
15. Remove the rear cross member
16. Remove the remaining engine/gearbox attaching bolts
17. Lower the gearbox slightly
18. Remove the gearbox

Other MERCEDES-BENZ procedures

• Mercedes-Benz eng. 2.3 111.984 timing chain replacement
• Single plate clutch with OM611 (611.981)/983/987, OM612 (612.981), M111 (111.984) engine
• Mercedes-Benz 2.3 111.984 cylinder head removal & torque
• Mercedes-Benz eng. 2.1 CDI timing chain replacement
• Cylinder head OM611 in W90X
• Mercedes-Benz eng. 111 timing chain replacement
• Mercedes-Benz eng. 2.0 111.951 timing chain replacement
• Mercedes-Benz eng. timing chain replacement
• Mercedes-Benz eng. Kompressor timing chain replacement
• Mercedes-Benz eng. 2.3 111.979 timing chain replacement