W210 717.41/43/44/46 (except 717.448/449) gearbox — MERCEDES-BENZ
W210 717.41/43/44/46 (except 717.448/449) gearbox on Mercedes-Benz: 27 steps, engines 104.945, 111.942, 111.947, 111.970.
Workshop procedure for MERCEDES-BENZ — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: platform codes 200, CDI, |, DIESEL, KOMPRESSOR, -T, 220, 230, 240, 250, TURBODIESEL, 280, 290, 300
- Opens: clutch fluid
🔧 Engine codes this applies to
📋 Procedure
- Refit all parts in the reverse order of removal
- Exhaust pipe bracket:
- Exhaust/exhaust manifold:
- Renew the self-locking nuts
- Propeller shaft/gearbox:
- Remove the rear exhaust pipe
- Gearbox support to body:
- Push the propeller shaft backwards
- Remove the speedometer plug from the gearbox
- Disconnect the clutch hydraulic line
- Gearbox filler plug
- Remove the ground cable from the gearbox
- Remove the engine/gearbox attaching bolts
- Remove the gearbox from under the vehicle
Other MERCEDES-BENZ procedures
- W210, W129, W163, W140, W170, W202, W208 clutch
- Mercedes-Benz eng. 111 timing chain replacement
- W210 716.6 06.2000< gearbox
- W210 716.6 <06.2000 gearbox
- Mercedes-Benz 111.940 cylinder head removal & torque
- Mercedes-Benz eng. 2.0 111.951 timing chain replacement
- Mercedes-Benz eng. timing chain replacement
- Mercedes-Benz eng. Kompressor timing chain replacement
- Mercedes-Benz eng. 2.3 111.979 timing chain replacement
- W906 - OM646 (646.984)/985/986/989 engine - ancillary drive belt
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.