IS 2AD-FHV belt — LEXUS
IS 2AD-FHV belt on Lexus: 13 steps, engines 2AD-FHV. What to remove, in what order, and what to check after.
Workshop procedure for LEXUS — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: platform codes 200D, |, 220D
🔧 Engine codes this applies to
📋 Procedure
- Remove the radiator cover
- Remove the air inlet
- Release the tensioner
- Note: Release the tensioner slowly
- Refit the engine upper cover
- Refit the air inlet
- Refit the radiator cover
Other LEXUS procedures
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.