IS 200 timing 2.0 24V — LEXUS

🧭 Before you start

Fits: platform code 200

• Timing position: the crankshaft or camshaft is set and locked during this job
• Renewed: if necessary note

Don't miss

• Never turn the engine in the direction opposite to that of normal operation

🔧 Engine codes this applies to

📋 Procedure

Preparation and removal

1. Unless otherwise advised by the manufacturer, the following procedures are recommended:
2. Never turn the engine in the direction opposite to that of normal operation
3. Check the tensioner and idler pulleys; renew if necessary
4. Note: Avoid bending, torsion or traction
5. Remove the ancillary drive belts

6. Remove the fan
7. Remove the timing belt covers
8. Loosen the tensioner
9. Use a hexagonal wrench
10. Loosen the bolt

Installation and checks

11. Push the tensioner pulley against the timing belt
12. Tighten the tensioner
13. Turn the engine 2 rotations by hand
14. Fit the crankshaft pulley
15. Use a special tool:
16. Align the crankshaft timing marks
17. Air-conditioning compressor:
18. Refit the compressor
19. Fit the ancillary drive belt
20. Refit the spark plugs
21. Refit the engine cover
22. Lock the tensioner
23. Refit the engine lower covers

Other LEXUS procedures

• IS 2AD-FHV belt
• IS300 ign timing
• Lexus GS 430 3UZ-FE timing belt replacement
• Lexus IS 2AD-FHV ->07.2010