TorqFix

Daily my05-07, my10 (F1C) belt — IVECO

Daily my05-07, my10 (F1C) belt on Iveco: 23 steps, engines F1CE0441A, F1CE0481A, F1CE0481B, F1CE0481F.

Workshop procedure for IVECO — the exact step sequence and torque figures, straight from real workshop data.

23 steps 7 engine codes

🔧 Engine codes this applies to

F1CE0441AF1CE0481AF1CE0481BF1CE0481FF1CE0481HF1CE3481CF1CE3481L

📐 4 workshop diagrams for F1CE0441A

Real factory drawings for this job — timing marks, bolt locations and routing. Locked in the free view.

Daily my05-07, my10 (F1C) belt — F1CE0441A · diagram 1
Daily my05-07, my10 (F1C) belt — F1CE0441A · diagram 2
Daily my05-07, my10 (F1C) belt — F1CE0441A · diagram 3
Daily my05-07, my10 (F1C) belt — F1CE0441A · diagram 4
🔒 4 workshop diagrams for this job Ask about your Iveco F1CE0441A — free or sign up free to see the drawings

📋 Procedure

  1. Alternator belt:
  2. Refit the alternator belt
  3. Air-conditioning compressor belt:
  4. Tension the tensioner pulley
  5. Turn the engine 1 rotation and check again
F1CE0441A? Steps differ between engine variants — check this job against your exact car before you commit to it. Check my car — free →
  1. Air-conditioning compressor belt:
  2. Fit the special tool to the crankshaft pulley
  3. Alternator belt:
  4. Loosen the tensioner pulley
  5. Use a wrench
  6. Remove the alternator belt
  7. Refit the air-conditioning belt
  8. Turn the crankshaft anti-clockwise
  9. Check for correct fitting
  10. Refit the engine lower cover
Workshop diagrams

Ask TorqFix about your Iveco F1CE0441A — it answers with the exact sequence for that engine and the workshop drawing for each step. First question is free after a 20-second sign-up, no card.

Ask about your Iveco F1CE0441A — free → or sign up free to see the drawings

Other IVECO procedures

Who makes these pages, and how

TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.

The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.

Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.

Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com

The story behind TorqFix →

Workshop data on this page last updated 20 Sep 2026.