TorqFix

Fiesta 1.6 Duratec anc belt — FORD

Fiesta 1.6 Duratec anc belt on Ford: 15 steps, engines HXJA, HXJB, IQJA, RVJA. What to remove, in what order, and what to check after.

Workshop procedure for FORD — the exact step sequence and torque figures, straight from real workshop data.

15 steps 6 engine codes

🧭 Before you start

Fits: platform codes 1.4, DURATEC, 16V, |, 1.6, TI-VCT

🔧 Engine codes this applies to

HXJAHXJBIQJARVJASPJDU5JA

📐 19 workshop diagrams for HXJA

Real factory drawings for this job — timing marks, bolt locations and routing. Locked in the free view.

Fiesta 1.6 Duratec anc belt — HXJA · diagram 1
Fiesta 1.6 Duratec anc belt — HXJA · diagram 2
Fiesta 1.6 Duratec anc belt — HXJA · diagram 3
Fiesta 1.6 Duratec anc belt — HXJA · diagram 4
Fiesta 1.6 Duratec anc belt — HXJA · diagram 5
Fiesta 1.6 Duratec anc belt — HXJA · diagram 6
Fiesta 1.6 Duratec anc belt — HXJA · diagram 7
Fiesta 1.6 Duratec anc belt — HXJA · diagram 8
+ 11 more diagrams
🔒 19 workshop diagrams for this job Ask about your Ford HXJA — free or sign up free to see the drawings

📋 Procedure

Preparation and removal

  1. Remove the drive belt cover
  2. Cut the belt(s) and remove
  3. Remove the bolt
  4. Fit the stud
  5. Turn the crankshaft clockwise
HXJA? Steps differ between engine variants — check this job against your exact car before you commit to it. Check my car — free →
  1. Check that the position is correct as shown

Installation and checks

  1. Fit the special tools
  2. Fit the ancillary drive belt
  3. Turn the engine 1 revolution clockwise by hand
  4. Remove the special tools
  5. Turn the crankshaft clockwise 2 rotations
  6. Check for correct fitting
  7. Repeat the procedure if required
  8. Refit the drive belt cover
Workshop diagrams

Ask TorqFix about your Ford HXJA — it answers with the exact sequence for that engine and the workshop drawing for each step. First question is free after a 20-second sign-up, no card.

Ask about your Ford HXJA — free → or sign up free to see the drawings

Other FORD procedures

Who makes these pages, and how

TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.

The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.

Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.

Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com

The story behind TorqFix →

Workshop data on this page last updated 20 Sep 2026.