TU5JP4 Drive belt removal — CITROEN
TU5JP4 Drive belt removal on Citroen: 11 steps, engines TU5JP4(NFU), TU5JP4B(NFR), TU5JP4S(NFS). What to remove, in what order, and what to check after.
Workshop procedure for CITROEN — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: platform codes 1.6, 16V, |, 110, 90, BIOFLEX, VTS
- Timing position: the crankshaft or camshaft is set and locked during this job
- Special tools named: locking pin
🔧 Engine codes this applies to
📐 26 workshop diagrams for TU5JP4(NFU)
Real factory drawings for this job — timing marks, bolt locations and routing. Locked in the free view.
📋 Procedure
- Remove the front right wheel
- Remove the tensioner locking pin
- Turn the tensioner anti-clockwise until the locking pin fits
- Remove the drive belt
- Refit the right wheel arch liner
- Refit the front right wheel
Ask TorqFix about your Citroen TU5JP4(NFU) — it answers with the exact sequence for that engine and the workshop drawing for each step. First question is free after a 20-second sign-up, no card.
Ask about your Citroen TU5JP4(NFU) — free → or sign up free to see the drawingsOther CITROEN procedures
- Xsara 16 16V TU5JP4 NFU
- Citroen Berlingo 1.6 NFU with marker timing belt replacement
- Peugeot 206, 307 TU5JP4 cylinder head removal & torque
- 206+/Partner B9 TU5JP4
- Citroen Berlingo 1.6 TU5JP4/TU5JP4B timing belt replacement
- Citroen DW10TD timing belt replacement
- Citroen DW10TD timing belt replacement
- Citroen Xantia non turbo 1.9 HDi XUD9A timing belt replacement
- Citroen Xantia turbo timing belt replacement
- Citroen EW10J4/EW7J4 timing belt replacement
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.