Replacing oil seal for Hall sender and sealing cap - left cylinder head — AUDI

🧭 Before you start

Fits: Audi A8 D2 (4D)

Don't miss

• Check direction of rotation of oil seal before fitting.
• If engine has been removed, bearing cap can be left in position when replacing oil seal and sealing cap. Procedure .

🔧 Engine codes this applies to

📋 Procedure

1. Remove left cylinder head cover .
2. Remove Hall sender and Hall sender rotor ring .
3. Unscrew double bearing cap (arrows).
4. Take out oil seal and sealing cap.
5. Clean contact and sealing surfaces as well as resting surfaces of double bearing cap.

6. Coat (hatched area) of double bearing cap with a small quantity of sealant; sealant Parts catalogue.
7. Check direction of rotation of oil seal before fitting.
8. Fit oil seal in position and install double bearing cap.
9. Use assembly lever to press in sealing cap. [Note: If engine has been removed, bearing cap can be left in position when replacing oil seal and sealing cap. Procedure .]
10. Install Hall sender rotor ring and washer .
11. Fit Hall sender .
12. Install left cylinder head cover .

Other AUDI procedures

• Testing fuel pump (electrical test)
• Removing and installing fuel delivery unit - vehicles with 6-cylinder turbo engine
• Assembly overview - intake manifold connections and throttle valve control module
• Checking injection quantity, leak tightness and spray pattern of injectors
• Checking coolant temperature sender -G62
• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures