Renewing ATF — AUDI
Renewing ATF on Audi: 11 steps. What to remove, in what order, and what to check after.
Workshop procedure for AUDI — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: platform code 70A
- Opens: gearbox oil
- Special tools named: V.A.G 1924
📋 Procedure
- Switch off engine.
- Raise vehicle.
- Place drip tray under gearbox.
- Remove ATF inspection plug from oil pan.
- Remove overflow pipe through inspection hole.
- Drain ATF.
- Install overflow pipe.
- Screw plug in until finger-tight.
- Fill with 3 litres of ATF through filler pipe using V.A.G 1924.
- Then start engine and shift through all the selector lever positions once with the vehicle stationary.
- Finally, check ATF level and top up .
Other AUDI procedures
- Removing and installing toothed belt – Audi · 56 torque figures
- Removing engine – Audi A8 D3 · 41 torque figures
- Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
- Installing engine – Audi A8 D4 · 36 torque figures
- Removing and installing camshaft timing chain · 29 torque figures
- Removing and installing window guide – Audi A6/A7 C7
- Removing and installing bumper cover - vehicles from model year 2015 onwards
- Removing and installing jump start socket U6 – Audi A6/A7 C7
- Removing and installing rear cigarette lighter U9 – Audi
- Removing and installing gear detector switch F208 – Audi
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.