Removing and installing water pump V36 — AUDI
Removing and installing water pump V36 on Audi: 10 steps. What to remove, in what order, and what to check after.
Workshop procedure for AUDI — the exact step sequence and torque figures, straight from real workshop data.
🧭 Before you start
Fits: platform code SG
Don't miss
- To repair wiring harness, use wiring harness repair setVAS 1978 B.
📋 Procedure
- Switch off ignition.
- Open cupboard doors behind refrigerator box.
- Remove lid (1).
- Disconnect connector (2).
- Unscrew cover (3) with union nut key3218.
- Cut through wiring harness for water pump (1).
- Pull wiring harness through grommet (2) and into water tank.
- Disconnect hose (1) from pump (2).
- Remove pump from water tank. [Note: To repair wiring harness, use wiring harness repair setVAS 1978 B.]
- Repair pump wiring harness Electrical system, General information97Repairs to wiring harnesses and connectors.
Other AUDI procedures
- Removing and installing toothed belt – Audi · 56 torque figures
- Removing engine – Audi A8 D3 · 41 torque figures
- Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
- Installing engine – Audi A8 D4 · 36 torque figures
- Removing and installing camshaft timing chain · 29 torque figures
- Removing and installing radio system "“RCD 200”"
- Removing and installing left rear window wiper motor, vehicles with rear wing doors
- Repairing retaining plate for rain and light sensor G397
- Removing and installing armrest on front seat · 1 torque figures
- Removing and installing cover and padding of seat cushion in 2nd row, Multivan/Business
Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 20 Sep 2026.