Removing and installing radio system "“RCD 200”" — AUDI

🧭 Before you start

Fits: VW Transporter T5 (7H), VW Transporter T6 (7E), VW Transporter T6 (7F)

• Special tools named: locking bar

📋 Procedure

1. Remove any CDs left in the unit Operating manual.
2. Switch off ignition and all electrical loads, and pull out ignition key.
3. Insert the radio release tools T10057 into the slots in the radio (arrows) until they engage.
4. Using release tool, pull radio in (direction of arrow) out of installation slot until you can access connectors on rear of radio.
5. Press together connector locking mechanism in direction of (arrows).

6. Swing locking bar up in (direction of arrow) and pull off connector.
7. Release and disconnect connector (arrow) on aerial connection.
8. Remove radio completely.
9. Press locking tabs (arrow) and pull release tools forwards out of radio.
10. Connect connectors to radio and engage them.
11. ⚠ Risk of damage to display and operating keys!When inserting the radio system into the installation slot by pressing against the display or operating keys, the unit could become damaged.When inserting the radio system never press against the display or operating keys. — Slide radio straight into the dash panel until it locks into place in the mounting frame.
12. If necessary, deactivate anti-theft coding .
13. Check coding of radio and re-code if necessary .

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing rear axle - Audi A1 quattro
• Removing and installing operating unit (Climatronic control unit J255) - automatically controlled air conditioner · 1 torque figures
• Removing and installing undamaged rear window – Audi A1
• Removing and installing battery in luggage compartment, Audi A1 quattro
• Removing and installing clutch master cylinder - vehicles from model year 2015 onwards