Removing and installing trim for Easy Entry system - standard seat with electric adjustment — AUDI

🧭 Before you start

Fits: Audi A5 (8T, 2007–2016)

Don't miss

• Make sure electrical connectors are fitted correctly (as far as stop) and engage audibly.
• Make sure trim engages properly with handle and bracket.

📋 Procedure

1. Press handle (arrow B) forwards as far as it will go and hold in this position.
2. Use removal wedge3409 to press lug (arrow A) off retaining tab (arrow C) in direction of (arrow).
3. Perform the same step on opposite side of trim (1).
4. Lift trim (1) out of handle with bracket (2) at an angle.
5. When doing so, disengage fastener (rear) of trim from the handle with bracket.

6. Detach trim (1) from handle with bracket (2) to the extent permitted by length of wire for Easy Entry button.
7. Unplug connector (1) at Easy Entry button (2).
8. Detach trim (3) with Easy Entry button.
9. Remove Easy Entry button .
10. First install Easy Entry button.
11. Attach connector to Easy Entry button. [Note: Make sure electrical connectors are fitted correctly (as far as stop) and engage audibly.]
12. First engage retaining tab (rear) of trim in handle with bracket.
13. Make sure trim engages properly with handle and bracket.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing passive tank for reducing agent – Audi
• Removing and installing supplementary fuel pump V393
• Checking fuel gauge senderG - A5 up to model year 2011, A4 up to model year 2012, rest-of-world vehicles with front-wheel drive
• Exploded view - cylinder head cover · 1 torque figures
• Removing and installing exhaust gas recirculation valve N18