TorqFix

Removing and installing sunroof headliner: Audi A3

Step-by-step removing and installing sunroof headliner for the Audi A3: 10 steps. What to remove, in what order, and what to check after.

Workshop procedure for AUDI — the exact step sequence and torque figures, straight from real workshop data.

10 steps

🧭 Before you start

Fits: Audi A3 (8P, 2003–2012)

Don't miss

  • Make sure that the side contact surfaces for the sunroof headliner are free of grease.

📋 Procedure

  1. Remove glass sunroof panel .
  2. Pull sunroof headliner forwards until bolts for rear slides are accessible.
  3. Remove bolts (arrows).
  4. Push front slides (1) forwards (arrow) until they can be removed.
  5. Push rear slides towards rear.
AUDI? Steps differ between engine variants — check this job against your exact car before you commit to it. Check my car — free →
  1. Push sunroof headliner forwards out of frame for sunroof operation.
  2. Remove rear slides. [Note: Make sure that the side contact surfaces for the sunroof headliner are free of grease.]
  3. Insert rear slides into guide on frame.
  4. Insert sunroof headliner into frame and push sunroof headliner towards rear.
  5. Insert front slides into guide on frame.

Who makes these pages, and how

TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.

The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.

Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.

Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com

The story behind TorqFix →

Workshop data on this page last updated 20 Sep 2026.