Removing and installing speech input control unit J507 (up to week 35/08) — AUDI

🧭 Before you start

Fits: Audi A6 C6 (4F, 2004–2011)

📋 Procedure

1. Switch off all electrical equipment.
2. Remove ignition key.
3. When renewing control unit, select "“Replacement”" function for appropriate control unit in "“Guided Fault Finding”".
4. Remove the radioR (MMI) .
5. Open radio cover (2) for radioR and fold it down (arrow).

6. Carefully pull the speech input control unit J507(1) in the direction of the arrow out of the radioR.
7. Installation is performed in reverse sequence.
8. Be sure that the connector between speech input control unit J507 and radioR properly engages in the radioR.
9. Switch on the radioR.
10. Briefly press the talk button on the multi-function steering wheel.
11. Say the command "“HELP”".
12. If the vehicle is equipped with a telephone, say "“TELEPHONE”".
13. Press talk button for approx. 1 second.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing left-side intake manifold (bottom section) - vehicles from 10.2004 onwards
• Removing and installing engine mounting (left and right)
• 10-cylinder direct petrol injection engine (5.2 ltr. 4-valve), mechanics — Securing engine to engine and gearbox support · 2 torque figures
• Installing gearbox in vehicles with 2.7 ltr. TDI engine – Audi
• Removing and installing particulate filter - vehicles with multitronic gearbox