Removing and installing sliding/tilting sunroof — AUDI

🧭 Before you start

Fits: platform code 7DK

📋 Procedure

1. Remove B-pillar upper trim: General body repairs, interior70Trim, insulation; Pillar and side panel trim; Removing and installing B-pillar upper trim on side with no sliding door and Removing and installing B-pillar upper trim on side with sliding door.
2. Remove A-pillar trims: General body repairs, interior70Trims, insulation; Pillars and side trims.
3. Unscrew bracket (1) for sun visors and separate connections for mirror light.
4. Prise out front interior light (W)(2) and separate connection (arrow).
5. Unclip cover strip (1).

6. Lever moulded headlining out of beading in area of lifting/sliding roof aperture using a plastic wedge.
7. Remove front seat area moulded headlining downwards.
8. Remove cross-head screws (2) (Qty. 11) and remove water collector plate (1) (with sun roller blind) downwards.
9. Remove countersunk screws (1) and pull electric drive (2) off frame.
10. Remove cross-head screws (3) (Qty. 10) and remove clamping frame (4) downwards.
11. Remove frame with glass panel upwards.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Connecting test box V.A.G 1598 A with adapter cable (47-pin) V.A.G 1598/33 to ABS with EDL control unit J104
• Checking voltage supply of secondary air pump motor V101 and secondary air pump motor 2 V189
• Checking multi-function switch F125 with 8-pin connector
• Checking relay for fuel cooling pump V166 – Audi 3.3 TDI AKF
• Checking fuel pump relay J17 and activation