Removing and installing seat cushion of 3-person bench seat, Multivan — AUDI

🧭 Before you start

Fits: VW Transporter T5 (7H), VW Transporter T5 (7J), VW Transporter T6 (7E), VW Transporter T6 (7F)

Don't miss

• Spring clips (2), (5), (10) and (11) are destroyed during removal. They must be renewed prior to installation.

📋 Procedure

1. Remove seats in 2nd row .
2. Remove table module in seat rails .
3. Move bench seat to foremost position.
4. Remove front 3-person bench seat trims .
5. Fold seat cushion (1) forwards.

6. Lever out the two clips (6) from their mountings.
7. Pull locking mechanism (7) covers to rear out of guides.
8. Using a small screwdriver, lever off spring clips (2), (5), (10) and (11). [Note: Spring clips (2), (5), (10) and (11) are destroyed during removal. They must be renewed prior to installation.]
9. Remove pins (3), (4), (8) and (9) from hinges.
10. Lift seat cushion (1) off seat frame.
11. Install in reverse order of removal.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Removing and installing radiator cowl - Audi A7 – Audi
• Removing and installing catalytic converter (left-side) - vehicles with dual clutch gearbox
• Removing and installing suspension strut (coil spring/shock absorber)
• Removing and installing bracket/hinges for centre armrest
• Checking gear oil level - gearbox with common oil system