Removing and installing radio "symphony": Audi A6 C5

🧭 Before you start

Fits: Audi A6 C5 (4B)

Don't miss

• Insert radio release tools T10057 into release slots on radioR as illustrated (arrows) until they engage. Pointed ends of grips must face outwards.

📋 Procedure

1. Switch off all electrical equipment.
2. Remove ignition key.
3. Ask customer for anti-theft coding.
4. Insert radio release tools T10057 into release slots on radioR as illustrated (arrows) until they engage. Pointed ends of grips must face outwards.
5. Grasp hold of grips on radio release tool T10057 and pull radioR out of dash panel.

6. Release and unplug connectors at radioR.
7. Press release tab (arrow) and pull out radio release tool T10057 to front.
8. Plug in all connectors.
9. Slide radioR carefully into dash panel and engage it in mounting frame.
10. Encode and adapt radioR: Radio, telephone and navigation system, self-diagnosis01
11. Activate anti-theft coding.

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Repairing airbagä 06.92
• Renewing engine electronics control unit
• Check idling stabilisation valve -N71
• Checking intake manifold changeover valve -N156
• Checking idling switch -F60