Removing and installing radiator grille - Audi RS 5: Audi A5

🧭 Before you start

Fits: Audi A5 (8T, 2007–2016)

📋 Procedure

1. Remove bumper cover .
2. Remove impact absorber .
3. If fitted, unplug electrical connectors (1) and (4).
4. Move clear electrical wiring harness (2) for parking aid senders on radiator grille by cutting cable tie.
5. Detach electrical connector (3) from bracket.

6. To do so, press catch in direction of (arrow A) and pull electrical connector (1) out of bracket (2) in direction of (arrow B).
7. Remove bolts (2).
8. Remove bolts (arrows).
9. Detach mountings (1) and (4) for parking aid senders.
10. Detach radiator grille (3) from bumper cover towards rear.
11. Install impact absorber .
12. Install bumper cover .

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• 5-speed manual gearbox 02T — Dismantling and assembling differential
• Removing and installing voltage regulators – Audi A2 · 1 torque figures
• Renewing oil seal for inlet camshaft sprocket with camshaft adjuster
• Removing and installing selector lever lock solenoid N110 on vehicles with vehicle ID No. from 8E_8A 002700 onwards
• Checking knock sensors – Audi TT Mk1