Removing and installing power steering control unit J500 — AUDI

🧭 Before you start

Fits: Audi A1 (8X, 2010–2018)

📋 Procedure

1. When renewing power steering control unit J500, select "“Replace control unit”" function.
2. Select Guided Fault Finding mode.
3. Press the Go to button, select the option "“Function/component selection”" and then select the following menu items:
4. Follow instructions on screen.
5. Remove steering column .

6. Remove bolts (arrows) and detach power steering control unit J500(item 1) from steering column.
7. Unplug electrical connectors (3).
8. Pry cover (2) off power steering control unit J500(item 1).
9. Remove bolts (1).
10. Release catches (arrows A) and detach wiring harness (3) from power steering control unit J500(item 2)(arrow B).
11. Install steering column .

Other AUDI procedures

• Removing and installing toothed belt – Audi · 56 torque figures
• Removing engine – Audi A8 D3 · 41 torque figures
• Removing camshaft timing chain from camshafts – Audi A6/A7 C7 · 38 torque figures
• Installing engine – Audi A8 D4 · 36 torque figures
• Removing and installing camshaft timing chain · 29 torque figures
• Checking cut-in signal for compressor regulating valve N280
• Removing and installing aerial amplifier 3R112/aerial amplifier 4 for TVR85, Avant · 1 torque figures
• Removing and installing digital radio aerial R183 (up to week 35/08)/aerial amplifier 3R112 (from week 36/08 onwards), saloon · 1 torque figures
• Aligning tailpipe · 1 torque figures
• Checking delivery rate – Audi A6 C6